1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.
1.Detect air residual from entire load;
2.Steady color change,easy to read;
3.Lead free formulation.
Test cycle of the resistometer
a)Evacuate the resistometer to 4.5±0.5KPa within 2minutes.
b)Admit steam to the resistometer to obtain the required temperature in 10s or less.
c)Maintain the conditions for the required exposure time.
d)At the end of the exposure period ,evacuate the resistometer to 10KPa or less within 1 min,then admit air to ambient pressure.